2-18
Chapter 2
Hardware Descriptions
KDB-SLI
This daughterboard can be installed only in a 12B or 24B keyset. The KDB-SLI provides one
additional SLI circuit for the connection of any standard telephone device. This KDB-SLI will
only operate when the keyset is connected to an 8-port DLI card so it can use the second B
channel. Each port on this card is intended for connection to one telephone. Connecting
multiple telephones to a port may result in incorrect operation or damage to the card. (See
Chapter 3 of the
Samsung OfficeServ500 Installation Manual
for details.)
NOTE: The circuitry on a KDB-SLI does not provide a loop open disconnect signal or have
the over-voltage protection necessary for OPX operation.
i
DCS SERIES KEYSETS
28-Button
i
DCS Keyset (28D)
(Figure 2–17)
y
32-character display (2 x 16) with three associated soft
keys and scroll key
y
28 programmable keys with tri-coloured LEDs
y
Two fixed-function keys
y
Keyset Status Indicator
y
Built-in speakerphone
y
Eight selectable ring tones
y
Volume Up/Down keys for digital control
of speaker, handset and ringer volumes
y
Desk- or wall-mounted
18-Button
i
DCS Keyset (18D)
(Figure 2–18)
y
32-character display (2 x 16) with three associated soft
keys and scroll key
y
18 programmable keys with tri-coloured LEDs
y
Two fixed-function keys
y
Keyset Status Indicator
y
Built-in speakerphone
y
Eight selectable ring tones
y
Volume Up/Down keys for digital control
of speaker, handset and ringer volumes
y
Desk- or wall-mounted
Figure 2–17
28-Button
i
DCS Keyset (28D)
Figure 2–18
18-Button
i
DCS Keyset (18D)
