English -
38
warranty and service
FAQS AND TROUBLESHOOTING
A fault may result from a minor error that you can correct
yourself with the help of the following instructions.
Do not attempt any further repairs if the following
instructions do not help in each specific case.
WARNING
Repairs to the appliance are to be performed only by
a qualified service technician. Improperly effected
repairs may result in considerable risk to the user.
If your appliance needs repair, please contact your
customer service centre.
What should I do if the cooking zones are not functioning?
Check for the following possibilities:
•
The fuse in the house wiring (fuse box) is intact. If the
fuses trip a number of times, call an authorised electrician.
•
The appliance is properly switched on.
•
The control indicators in the control panel are
illuminated.
•
The cooking zone is switched on.
•
The cooking zones are set at the desired heat settings.
What should I do if the cooking zones will not switch on?
Check for the following possibilities:
•
A period of more than 20 seconds has elapsed between
when the On/Off button was actuated and the desired
cooking zone switches on (see the section “Switching
the appliance on”).
•
The control panel is partially covered by a damp cloth
or liquid.
What should I do if the display except for , the
residual warmth indicator suddenly disappears?
This could be a result of one of two possibilities:
•
The On/Off sensor was accidentally actuated.
•
The control panel is partially covered by a damp cloth
or liquid.
NZ64H5747DK_ET_DG68-00660B-02_EN.indd 38
2017-05-25 12:20:45
