64 English
Troubleshooting
Troubleshooting
Information codes
CODE SYMBOL
MEANING
SOLUTION
Shorted Key.
Press the
OVEN OFF
pad and
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the
power.
If this does not solve the
problem, call for service.
See the instructions below
this chart.
Oven sensor opened problem.
Oven sensor shorted problem.
Oven overheating.
Door locking error.
For any codes not listed above, or if the suggested solution does not fix the
problem, call 1-800-SAMSUNG (726-7864).
PROBLEM
POSSIBLE CAUSE
SOLUTION
Oven racks
are difficult to
slide.
Apply a small amount of
vegetable oil to a paper towel
and wipe edges of the oven
racks with the paper towel.
Racks become dull and hard
to slide when they are left in
the oven during a self-clean
cycle.
Warming
drawer or
storage drawer
does not slide
smoothly or
drags.
The drawer is not properly
aligned with the full-
extension roller guide rails or
nylon drawer guides.
Remove and replace the
drawer. (See page
The contents in the drawer
are too heavy.
Reduce the weight and/or
redistribute the contents in
the drawer.
NX58R4311SS_AA_DG68-01151A-00_EN.indd 64
1/25/2019 11:18:53 AM
Содержание NX58 Series
