16 English
Ins
tallation r
equir
ement
s
Installation requirements
Recommended locations for gas piping and electrical outlets
(For model NX58*931***)
Recommended area
for 120V electrical
outlet on rear wall
Recommended
position
30 in (76.2 cm)
Cabine
t Opening
12 in
(30.5 cm)
17 in x 9 in
(43.2 cm x 22.9 cm)
Gas Wall Area
Recommended area
for through-the-wall
and through-the-floor
connection of gas pipe
stub and shut-off valve.
17 in x 2 in
(43.2 cm x 5.1 cm)
Gas Floor Ar
ea
CAUTION
You must use the rear filler kit to install the range in a freestanding cutout cabinet.
For more information, see “Optional rear filler kit” as shown below.
Optional rear filler kit
WARNING
Used to fill gap between the range back and wall. Adds a filler strip to the rear of
the range. This kit can only be used when the opening in the countertop is 25” deep.
NOTE
If the countertop depth is greater than 25”, there will be a gap between the filler
kit and the back wall.
To avoid breakage
CAUTION
Please
DO NOT
push the unit strongly when
you install. These actions can cause the
damage to the unit.
Please
DO NOT
push the burner knobs when
installing the range.
(Grasp the L/R door area to push the unit.)
Install_NX58R9311SS_AA_DG68-00906B-00_EN+MES+CFR.indb 16
2019-06-03 2:18:16