8 English
Ins
tallation
Installation
WARNING
Do not step on or twist the wires during installation, and keep them away from
heat-emitting parts of the oven.
Cabinet mount
If installing the oven in a built-in cabinet, the cabinet must have its plastic surfaces
and adhesive parts resistant up to 90 °C. Samsung is not responsible for damage to
furniture from the oven’s heat emission.
The oven must be properly ventilated. For ventilation, leave a gap of about 50 mm
between the lower shelf of the cabinet and the supporting wall. If you install the
oven under a cooktop, follow the cooktop’s installation instructions.
Required Dimensions for Installation
D
E
C
B
A
L
K
J
I
F
H
G
Oven (mm)
A
560
G
Max. 506
B
175
H
Max. 494
C
370
I
21
D
Max. 50
J
549
E
595
K
572
F
595
L
550
Prepare to install the oven
Phillips Screwdriver
Drill
Power connection
01 02 03
L
N
01
BROWN or BLACK
02
BLUE or WHITE
03
YELLOW and GREEN
Plug the oven into an electrical socket. If
a plug-type socket is not available due to
allowable current limitations, use a multi-
pole isolator switch (with at least 3 mm
spacing in-between) in order to meet safety
regulations. Use a power cord of sufficient
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5-2.5 mm².
Rated current (A)
Minimum cross-sectional area
10 < A
≤
16
1.5 mm
2
16 < A
≤
25
2.5 mm
2
Check the output specifications on the label attached to the oven.
Open the rear cover of the oven using a screwdriver, and remove the screws on
the cord clamp. Then, connect the power lines to the relevant connection terminals.
The ( )-terminal is designed for earthgrounding. First connect the yellow
and green lines (earthgrounding), which must be longer than the others. If
you use a plug-type socket, the plug must remain accessible after the oven is
installed. Samsung is not responsible for accidents caused by missing or faulty
earthgrounding.
NV75N5672RS_EE_DG68-01055E-01_SV+NO+FI+DA+EN.indb 8
NV75N5672RS_EE_DG68-01055E-01_SV+NO+FI+DA+EN.indb 8
2021-03-24 오후 5:31:15
2021-03-24 오후 5:31:15