English 17
Oper
ations
4.
Use a dry cloth to clean inside the oven.
WARNING
Do not open the door before the cycle is complete. The water inside the oven is
very hot, and it can cause a burn.
NOTE
•
If the oven is heavily soiled with grease, for example, after roasting or grilling,
it is recommended to remove stubborn soils manually using a cleaning agent
before activating Steam cleaning.
•
Leave the oven door ajar when the cycle is complete. This is to allow the interior
enamel surface to dry thoroughly.
•
While the oven is hot inside, auto cleaning is not activated. Wait until the oven
cools down, and try again.
•
Do not pour water onto the bottom by force. Do it gently. Otherwise, the water
overflows to the front.
Pyro cleaning
Pyrolytic features high temperature thermal cleaning. It burns off oily leftovers to
facilitate manual cleaning.
1.
Remove all accessories including the side
runners, and wipe out large pieces of
impurities manually from inside the oven.
Otherwise, they may cause flames during
the cleaning cycle, resulting in fire.
2.
Turn the mode selector to select
.
Cleaning
Two cleaning modes are available for you. This function saves you time by
removing the need for regular manual cleaning. The remaining time appears on
the display during this process.
Function
Instructions
C 1
Steam cleaning
This is useful for cleaning light soiling with steaming.
C 2
Pyro cleaning
Pyrolytic features high temperature thermal cleaning.
It burns off oily leftovers to facilitate manual cleaning.
Steam cleaning
This is useful for cleaning light soiling with steaming.
1.
Pour 400 ml (3/4 pint) of water onto the
bottom of the oven and close the oven
door.
2.
Turn the mode selector to select
.
3.
Turn the value dial to select
C 1
(Steam
cleaning), and then press
OK
to start
cleaning.
Steam cleaning runs for 26 minutes.
NV68A1170BS_EU_DG68-01366C-00_EN.indd 17
NV68A1170BS_EU_DG68-01366C-00_EN.indd 17
2021-04-22 오후 1:28:44
2021-04-22 오후 1:28:44
