background image

2

Important Safety Information

Safety Instructions

Your system is designed and tested to meet 

the latest standards for safety of information 

technology equipment. However, to ensure 

safe use of this product, it is important that 

the safety instructions marked on the product 

and in the documentation are followed.

Always follow these instructions to 

help guard against personal injury 

and damage to your system.

Setting Up your System

  Read and follow all instructions marked 

on the product and in the documentation 

before you operate your system. Retain 

all safety and operating instructions for 

future use.

  Do not use this product near water or a 

heat source such as a radiator.

  Set up the system on a stable work 

surface.

  The product should be operated only with 

the type of power source indicated on the 

rating label.

  Ensure that the electrical outlet you are 

using to power your equipment is easily 

accessible in case of fire or short circuit.

  If your computer has a voltage selector 

switch, make sure that the switch is in the 

proper position for your area.

  Openings in the computer case are 

provided for ventilation. Do not block 

or cover these openings. Make sure 

you provide adequate space, at least 6 

inches (15 cm), around the system for 

ventilation when you set up your work 

area. Never insert objects of any kind into 

the computer ventilation openings.

  Ensure that the fan vents on the bottom 

of the casing are clear at all times. Do 

not place the computer on a soft surface, 

doing so will block the bottom vents.

  If you use an extension cord with this 

system, make sure that the total power 

rating on the products plugged into the 

extension cord does not exceed the 

extension cord power rating.

Содержание N128



















































































Отзывы: