Samsung MX-ST50B, Руководство пользователя

Страница: 9 / 33

ENG - 2 ENG - 3
01 CHECKING THE COMPONENTS
Sound Tower Main Unit Remote Control (AH81-11472A) /
Batteries
Power Cord
(AH81-11474A)
• For more information about the power supply and power consumption, refer to the label attached
to the product. (Label: Rear of the Sound Tower Main Unit)
• To purchase additional components or optional cables, contact a Samsung Service Center or
Samsung Customer Care.
• When moving the product, do not drag or pull the product from the ground. Lift the product when
moving the product.
Inserting Batteries before using the Remote Control
(AAA batteries X 2)
Slide the battery cover in the direction of the arrow
until it is completely removed. Insert 2 AAA
batteries (1.5V) oriented so that their polarity is
correct. Slide the battery cover back into position.
02 PRODUCT OVERVIEW
Top Panel of the Sound Tower
BASS
Remote
Sensor
When operating the Sound Tower system, please aim the front of the remote control at
the remote sensor.
Display
Window
Displays operating messages or current status of the Sound Tower system.
You also need to add a description of these five lamp effects
BT USB AUX1 AUX2 Power
Power Turns the Sound Tower on and off.
Light
Press the
(Light)
button to turn the Lighting Mode on.
Source
Press to select a source connected to the Sound Tower.
Press and hold the
(Source) button for more than 5 seconds to enter the
“ SEARCHING TV ” mode.
Play/Pause
• Play/Pause
Press the button to pause a music file temporarily.
When you press the button again, the music file plays.
• Demo play
Press and hold the button for more than 5 seconds to start the Demo play while
the system is turned on. No VFD display, 5 LEDS flashing simultaneously and it plays
demo music for 60 seconds.
– Please be careful as it may play louder than the set volume.
Volume down Press the (Volume down) button to lower the volume.
Volume up
Press the (Volume up) button to raise the volume.
BASS Press the BASS button to use the powerful bass sound.