ENGLISH-18
Using installation/service mode of ERV wired remote controller
1)* The total option codes are 24 digits . You can set six digits at a time and it is distinguished by page number .
Press the
Timer
button to go to the next page .
• Options can be set from SEG1 to SEG24
ū SEG1, SEG7, SEG13, and SEG19 are page option so they cannot be set nor be displayed .
ū SEG2 is the option type which cannot be set .
ū When SEG2~SEG6 and SEG8~SEG12 are set, "On" is displayed and when SEG14~18 and
SEG20~24 are set, "Off" is displayed .
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10 SEG11 SEG12
0
X
X
X
X
X
1
X
X
X
X
X
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
2
X
X
X
X
X
3
X
X
X
X
X
On (SEG2~SEG6, SEG8~SEG12)
Off (SEG14~18, SEG20~24)
• The current SEG displayed can be distinguished by operation mode, On, and Off icon .
SEG2~SEG6, SEG8~SEG12
ū On(Heat-EX
By Pass
Auto
Quiet
Away)
SEG14~SEG18, SEG20~24
ū Off(Heat-EX
By Pass
Auto
Quiet
Away)
<SEG 2, 3>
PAGE 1
PAGE 6
PAGE 2
PAGE 7
PAGE 3
PAGE 8
PAGE 4
PAGE 9
PAGE 5
PAGE 10
<SEG 14, 15>
<SEG 4, 5>
<SEG 16, 17>
<SEG 6, 8>
<SEG 18, 20>
<SEG 9, 10>
<SEG 21, 22>
<SEG 11, 12>
<SEG 23, 24>
Caution
2)* When setting the address or option, you can set the target device with sub menu no .1 .
3)* Power Master Reset is a setting needed to supply optimized power to ERV wired remote controller when
multiple indoor units or ERVs are connected to ERV wired remote controller in a group .
4)* RMC(1) : 0~F / RMC(2) : 0~F (hexadecimal)
When RMC(1) is F, RMC(2) can be set up to E . (RMC(1) : Group channel, RMC(2) : Group address)
5)* Displaying address of ERVs (hexadecimal display)
e .g . 30 00 0B
6)* Fan step setting is available only when one ERV is connected .
ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 18
2016-12-23 오후 6:02:56
