Understanding the copy screen
112
4. Copying
•
This feature is available only when the standard or booklet finisher is not
installed.
•
This feature is available only with Letter- and A4-sized print media.
•
Before using this feature, you must load the paper in both SEF (Short
edge feed) and LEF (Long edge feed) trays. For example, the direction of
feed for the paper in tray 1 must be SEF and direction of feed for the
paper in tray 2 must be LEF.
•
Finisher:
Specifies the number of staples, folds, and hole punches to apply
to the document.
•
These options are available only when the inner finisher, 2k booklet
finisher, or 3k finisher is installed.
•
The
Hole Punch
option is available only when the optional punch kit is
installed in the optional standard finisher or booklet finisher.
-
Staple
: Specify the number of staples to use when binding the
document (either 1 or 2 staples).
-
Punch
: Specify the number of holes to punch in the document (either
two or three holes). Some punch kits may offer a
4 Hole
option instead
of the
3 Hole
option.
-
Fold
: Specify the number of folds to make in the document (1-3).
▪
Outside, Top
: Prints the content on the outside of the tri-fold
paper. The machine folds the bottom of the page to form the inner
flap and the top of the page to form the outer flap.
▪
Outside, Bottom
: Prints content on the outside of the tri-fold paper.
The machine folds the top of the page to form the inner flap and the
bottom of the page to form the outer flap.
▪
Inside, Top
: Prints the content on the inside of the tri-fold paper.
The machine folds the bottom of the page to form the inner flap and
the top of the page to form the outer flap.
▪
Inside, Bottom
: Prints the content on the inside of the tri-fold
paper. The machine folds the top of the page to form the inner flap
and the bottom of the page to form the outer flap.
▪
Devide Into Sets
: Specify the number of pages to include in each
set when using the
C-Folding
option. You can include up to 3 pages
in each set.
•
Output Tray:
Selects the output tray.
Original Size
Use this option to set the actual paper size of the originals.
•
Auto:
Automatically detect the size of original (see "Media sizes
automatically detected" on page 59).
•
Mixed Size:
Automatically detect the size of original if the original uses a
combination of different paper size (see "Loading mixed sizes of originals"
on page 49).
•
Custom size:
If you need to set a custom value for a special size of paper,
use the arrows to set the required size.
