93
2. Using a network-connected machine
Installing driver over the network
•
The machine that does not support the network interface, it will not
be able to use this feature (see
).
•
Some features and optional goods may not be available depending
on model or country (see
"Features by models" on page 6
).
6
Windows
1
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 90).
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
The software CD should automatically run and an installation window
will appear.
3
Select
Install Now
.
The
Custom Installation
allows you to select the machine’s connection and
choose individual components to install. Follow the instructions on the
window.
4
Read
License Agreement
, and select
I accept the terms of the License
Agreement
. Then, click
Next
.
The program searches for the machine.