Samsung MIM-B18 Скачать руководство пользователя страница 49

Страница: 49 / 188

E-

Zone Management (Continued)

Click [Remove disappeared] to remove all disappeared devices which were found
after tracking.

Change zone properties.



You can select “General”, “AHU”, and “Group”.

Click [Apply].



Edited zone structure will be applied.

To cancel the setting, click [Cancel].

Mode

Property name

Description

Remarks

Individual

initialization

mode

General

Virtual group which is managed by

installation address, not by RMC

address
The user can create and delete zone.

Group

Not applicable.

( Only supported in group initialization

mode.)

Not applicable.

( Only supported in group initialization

mode.)

AHU

Virtual group which manages AHU kit

in general zone.
The user can create and delete.

It will be displayed as single device in

the control and monitoring screen, and

it can be controlled as single device.
You cannot move subordinate device

to the other zone.

Group

initialization

mode

General

Virtual group which is set and

managed by the user.
The user can create and delete.

Group

Virtual group which is managed by

installation address, not by RMC

address.

The user cannot create and delete.

DMS2 creates it automatically.

It is displayed like as one device in the

control and monitoring screen and can

be controlled.

You cannot move subordinate device

to the other zone.

AHU

Virtual group which manages AHU kit

in general zone.
The user can create and delete.

It is displayed like as one device in the

control and monitoring screen and can

be controlled.
You cannot move subordinate device

to the other zone.

MIM-D00A_DMS2_IB_E 32140-2.indd 49

2010-05-17 ｿﾀﾀ・10:42:21

Содержание MIM-B18





























































































































































































Результаты поиска

Содержание MIM-B18

Отзывы:

Samsung MIM-B18, Руководство пользователя, Страница: 49 / 188

Результаты поиска

Содержание MIM-B18

Отзывы: