Samsung LH067XATSAC Скачать руководство пользователя страница 5

Страница: 5 / 118

1.2 Safety Guidelines

Personal protection

Ensure you understand and follow all the safety guidelines, installation instruction,

warnings and symbols.

Mind yourself while working with heavy loads and high voltage.

Contact with high voltage may cause death or serious injury. Always disconnect power to

the display cabinet or cabinets prior to servicing.

All personnel at the LED Video Board installation site are required to have personal

protection equipment (PPE) such as hard hats, safety glasses, gloves, harnesses, and

other appropriate safety equipment.

Equipment protection

This installation must be performed by authorized and qualified technical personnel only.

Accredited safety officers must ensure the safety of the site, construction, assembly,

connection, use, dismantling, transport etc.

Assembly parts are designed for use only with Samsung displays.

LEDs use specific materials and manufacturing processing in order to achieve unique

advantages.Do not modify and/or replicate any components.

Ground the LED display screen before connecting the power source.Contacting displays

that are not earth-grounded may cause death or serious injury.

Do not use the LED display screen ground lugs for installation equipment such as welding

equipment.

Structural & mounting components should be kept dry, clean, lubricated (only if

recommended), coated properly, and maintained in a manner consistent with part design.

LED products must be installed and operated in a manner to reply on its design and

inspection a routine basis for security, wear, deformation, corrosion and any other

circumstances that may affect the load handling capability of the part.

We recommend inspections at regular intervals for all installations and increasing in

frequency for more critical installations. A part is damaged which may cause a decrease

in load capability. The part must be removed for service or replaced immediately.

Always follow LED display screen installation instruction.

Contact the support technical person if user has any question regarding the safety of an

application. The manufacturer assumes no liability for incorrect, inadequate, irresponsible

or unsafe assembly of systems.

Содержание LH067XATSAC























































































































Результаты поиска

Содержание LH067XATSAC

Отзывы:

Похожие инструкции для LH067XATSAC

Бренды по названию

Популярные бренды

Samsung LH067XATSAC, Руководство пользователя

Результаты поиска

Содержание LH067XATSAC

Отзывы:

Похожие инструкции для LH067XATSAC

Бренды по названию

Популярные бренды