Samsung Jet Bot VR50T95735W/SA Скачать руководство пользователя

Страница: 38 / 48

APPENDIX

Corrective measures before reporting a problem

The Status Indicator
turns red and blinks
with a voice guide.

Turn off the power
switch and check the
instructions below
and take appropriate
actions.

When turning
the Jet Bot on by
pressing the power
switch, the Status
Indicator turns
white.

Voice Guide

Checklist

It's difficult to move. Please move
me somewhere else.

• The Jet Bot is caught, stuck or trapped while moving

around.

– Turn off the power switch and move the Jet Bot to

another area.

Please remove the brush and take
out whatever's stuck in there.

• Foreign matter caught in the brush

– Turn off the power switch and remove the foreign

matter from the brush.

Please check the left wheel to see
if there's something stuck in it.

• Foreign matter caught in the left Driving Wheel

– Turn off the power switch and remove the foreign

matter from the left Driving Wheel.

Please check the right wheel to
see if there's something stuck in
it.

• Foreign matter caught in the right Driving Wheel

– Turn off the power switch and remove the foreign

matter from the right Driving Wheel.

Something's wrong with the front
bump sensors. Please open the
cover and check. The bumper
might be jammed, or there might
be something stuck in there.

• Bumper Sensor needs to be checked.

– Turn off the power switch and turn it back on.

– When the Status Indicator remains in red color and

blinks, check if there's any small foreign matter
between the bumper and the main body. If there is,
remove the foreign matter.

Can't see anything. Please clean
the front with a soft cloth.

• Foreign matter accumulated on the Obstacle Sensor

Window.

– Turn off the power switch and clean the Obstacle

Sensor Window at the front with a soft cloth.

Something's wrong with the cliff
sensor. Please clean the 5 small
black windows underneath with a
soft cloth.

• Foreign matter accumulated on the Cliff Sensor

– Turn off the power switch and clean 5 Cliff Sensor

Windows at the bottom with a soft cloth.

Please insert the bin so cleaning
can start.

• Dustbin is not inserted.

– Detach the Dustbin and insert it again.

The LiDAR sensor needs to be
reset. Turn the power off, then on
again. If that doesn't fix it, contact
Customer Service.

• There is a problem with the LiDAR sensor.

– Turn the power off, then on again. If the notice

remains, contact Customer Service.

English

VR9500_EN_00846J-02_SA.indd 38

2022-10-12 오후 10:46:32

Содержание Jet Bot VR50T95735W/SA

















































Результаты поиска

Содержание Jet Bot VR50T95735W/SA

Отзывы:

Похожие инструкции для Jet Bot VR50T95735W/SA

Бренды по названию

Популярные бренды

Samsung Jet Bot VR50T95735W/SA, Руководство пользователя

Результаты поиска

Содержание Jet Bot VR50T95735W/SA

Отзывы:

Похожие инструкции для Jet Bot VR50T95735W/SA

Бренды по названию

Популярные бренды