MAINTENANCE
Cleaning the Jet Bot
Before maintenance work, you should turn off the power switch at the side of the Jet Bot.
Emptying and cleaning the Dustbin
1
Detach the upper cover using the groove
under the cover.
2
Hold the Dustbin handle and lift the
Dustbin up.
3
Unlock the transparent clip at the side of
the Dustbin to open its Upper Cover.
4
Pull the Pre-motor Filter from the Dustbin.
5
Unlock the transparent clip at the bottom of
the Dustbin to open its Lower Cover.
6
Remove the dust on the filter and Dustbin,
clean them with water, and dry completely
in the shade.
MAINTENANCE
English 23
VR9500_EN_00846J-02_SA.indd 23
2022-10-12 오후 10:46:19
