Samsung iDCS500, Руководство пользователя

Страница: 18 / 80

Samsung
i
DCS500 DCS (Euro) Keyset User Guide
– 10 –
ANSWERING AN OUTSIDE CALL
§
Lift the handset and you are automatically connected to the ringing call.
(See Ring Preference in the section “Customising Your Keyset.”)
OR
Press the
ANS/RLS key to automatically answer on the speakerphone.
Note: If a call is flashing at your keyset, but not ringing, you must press the flas h-
ing CALL key to answer.
UNIVERSAL ANSWER (UA) DEVICE
Outside lines can ring over the paging system or to a loud ringer. To answer
ringing calls dial
67 or press the UA key. The UA device can operate in Day
or Night mode and in any one of six different ring plans.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER key before dialling.
RECALL DIAL TONE
§
Press the NEW key to disconnect your existing call, wait for dial tone
and then make a new call on the same line.
Note: If the NEW key does not appear on your keyset, the FLASH key may be pro-
grammed to recall dial tone.
SENDING A FLASH
While on an outside call, press the programmed FLASH key to send a flash
to the telephone company. This is required for some custom calling features
or CENTREX use (e.g. for nuisance calls).
Note: Flash is not available on ISDN circuits.