Samsung iDCS 500, Руководство по программированию

Страница: 249 / 533

iDCS 500 PROGRAMMING
TECHNICAL MANUAL PART 2 SEPTEMBER 2003
MMC: 705
ASSIGN SYSTEM SPEED DIAL
DESCRIPTION:
Enables the assignment of system speed dialling numbers. There are up to 950
entries available for programming (see MMC 606). Each speed dial number
consists of a trunk or trunk group access code followed by a separator and up to 24
digits to be dialled. These dialled digits may consist of 0-9,
✱
and #. If the system
recognises a valid trunk or trunk group access number, it will automatically insert
the separator.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
B Used to insert a flash code "F"
C Used to insert a pause code "P"
D Used to insert a pulse/tone conversion code "C"
E Used to mask/unmask following digits - shows as "[" or "]"
F Used to enter name for speed dial bin (see MMC 706)
ACTION DISPLAY
1. Press TRSF 705
Display shows
SYS SPEED DIAL
050:
2. Dial speed index desired (e.g., 505)
OR
SYS SPEED DIAL
505:
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter access code (e.g., 9/701) plus the
phone number up to 24 digits (digits will
SYS SPEED DIAL
505:9–121223456789
scroll under) and press RIGHT soft key to
return to step 2
4. Press F key to toggle to MMC 706 step 3 to
enter name
SYS SPEED NAME
505:
HELP
Table of
Contents
HOME
PAGE