Samsung iDCS 500, Руководство по программированию

Страница: 156 / 533

iDCS 500 PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 2001
MMC: 419
DISTINCTIVE RINGING
DESCRIPTION:
Allows the technician to select the ring tone heard at a keyset when called by a
specific station or when a specific trunk rings that keyset. There is also a cadence
control option to perform a similar function for single line sets. There are eight ring
tones available along with a Follow Station (F-STN) option for the keysets. There are
5 cadences and a follow station option for SLT’s.
TONE OPTION DESCRIPTION
F-STN Calls will ring with the keyset users choice of ring frequency.
1 ~ 8 Calls from the programmed station or trunk will ring keysets
with this ring frequency.
CADENCE OPTION DESCRIPTION
F-STN Calls will ring with the normal SLT ring cadences.
1 Calls from the programmed station or trunk will ring SLT’s
with the intercom ring cadence.
2 Calls from the programmed station or trunk will ring SLT’s
with the CO ring cadence.
3 Calls from the programmed station or trunk will ring SLT’s
with the DOOR ring cadence.
4 Calls from the programmed station or trunk will ring SLT’s
with the ALARM ring cadence.
5 Calls from the programmed station or trunk will ring SLT’s
with the CALLBACK ring cadence.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
HELP
Table of
Contents
HOME
PAGE