ENG - 24
•
Volume restriction function
Because it may damage hearing when the power is turned on at high volumes, it
adjusts the volume to 20 when the set volume is higher than 20.
– The default value for Volume restriction is off. The set volume is maintained even
when the power is turned off.
– To change the setting, press and hold the
Down
button on the remote control for
5 seconds. With the volume restriction off, “
V FREE
” appears on the front display
and with the function on, “
V LOCK
” appears.
Sound Control
You can select from
TREBLE
,
BASS
, or
AUDIO SYNC
.
•
To control the volume of the treble or bass sound, select
TREBLE
or
BASS
in Sound
Settings, and then adjust the volume between -6~+6 by using the
Up/Down
buttons.
•
Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz, and 10KHz are
selectable using the
Left/Right
buttons and each can be adjusted to a setting between
-6 to +6 using the
Up/Down
buttons.
•
If the video on the TV and audio from the Soundbar are not synchronised, select
AUDIO
SYNC
in Sound Settings, and then
set the audio delay between 0~300 milliseconds
by
using the
Up/Down
buttons. (Not available in “
USB
” mode.)
•
AUDIO SYNC
is only supported for some functions.
WOOFER
SO
UN
D
M
OD
E
VOL
W
OOFE
R
SOUNDB
AR
SO
UN
D
M
OD
E
VOL
W
OOFE
R
SOUNDB
AR
Push the button up or down to adjust the volume of the subwoofer to -12 or between -6 to
+6. To set the subwoofer volume level to 0, press the button.
VOL
SO
UN
D
M
OD
E
VOL
W
OOFE
R
SOUNDB
AR
SO
UN
D
M
OD
E
VOL
W
OOFE
R
SOUNDB
AR
Push the button up or down to adjust the volume.
•
Mute
Press the
VOL
button to mute the sound. Press it again to unmute the sound.
