· 6 · English
5.
While the subwoofer's indicator is flashing blue, press the
button on your remote control or on the right
side of Soundbar main unit to turn on the Soundbar main unit.
6.
The connection is complete if the indicator on the front of the subwoofer stops flashing and glows
continuously.
c
If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.
Expand to true wireless surround sound by connecting the Samsung Wireless Rear
Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)
c
For further information, refer to the Web Manual.
CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c
Important: Before you begin, put the battery into the remote. See page 14 for instructions.
Method 1. Connecting with a Cable
DIGITAL AUDIO IN
(OPTICAL)
Soundbar
Bottom of Soundbar
OPTICAL OUT
Optical Cable
Check the DIGITAL AUDIO IN
(OPTICAL) port of the
Soundbar main unit.
Check the OPTICAL OUT
port of your TV.
1.
Connect the
DIGITAL AUDIO IN (OPTICAL)
jack on the Soundbar to the
OPTICAL OUT
jack of the TV with
a digital optical cable.
2.
Press the
button on the right side of the Soundbar or the
SOURCE
button on the remote control to
select the
D.IN
mode.
D.IN
c
If TV sound is not output, press the
button on the right side of your Soundbar or the
SOURCE
button
on the remote control to select the
D.IN
mode on Soundbar main unit display.
c
If the Soundbar main unit display does not change to D.IN, disconnect the HDMI cable.
c
Press the
button on the remote control for 5 seconds to turn Auto Power Link on or off.
(Auto Power Link is set to ON by default.)
