14
INSTALLATION
PLaCing tHe SOUnDBaR On a tV StanD
Place the Soundbar on a TV stand.
●
If the
Holder-foot
(3 ea) and
Holder-Support
(2 ea) are not attached to the Soundbar, start at Step
1 below. If they are attached to the Soundbar, start at Step 4.
AUX IN
LAN
HDMI IN
O
PTICA
L IN
HDMI O
UT
(TV
-ARC)
5V 0.5A
SPK ADD
Wi-Fi SETUP
DC 24V
AUX IN
LAN
HDMI IN
OPTICAL IN
HDMI OUT (TV
-ARC)
5V 0.5A
SPK ADD
Wi-Fi SETUP
DC 24V
2 3
1
1.
Place the Soundbar as shown in the illustration, ensuring that none of the buttons touch the surface it is lying on.
you can use the Soundbar's packaging to support its two ends.
2.
attach the
Holder-Foot
(3 ea) to the Soundbar using 3
Holder-Screws 2
as shown in the illustration. Tighten the
screws firmly.
3.
In the same manner, attach the
Holder-Support
(2 ea) to the Soundbar using 2
Holder-Screws 2
. Tighten the
screws firmly.
4.
align the Soundbar’s centre with the centre of the base of the TV, and then carefully push it onto the stand as far
as it will go, as shown in the illustration. Be careful not to unbalance the TV.
