ENG
19
CONNECTIONS
+
Using the Bluetooth POWER On function
The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth
compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on
or off will turn the Soundbar's power on and off as well.
1.
Connect the TV to your Soundbar using the TV SoundConnect function.
2.
Press the
Bluetooth POWER
button on the Soundbar remote.
ON - BLUETOOTH POWER
appears on the
Soundbar's display.
•
ON - BLUETOOTH POWER
: The Soundbar turns on and off when you turn the TV on or off.
•
OFF - BLUETOOTH POWER
: The Soundbar only turns off when you turn the TV off.
●
This function is supported by some Samsung TVs released from 2013 on.
CONNECTING TO A TV USING AN HDMI (DIGITAL) CABLE
DC 14V
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT
(TV-ARC)
5V 0.5A
HDMI IN
HDMI OUT
(TV-ARC)
HDMI OUT
(TV-ARC)
HDMI Cable
(not supplied)
1.
Connect an HDMI cable (not supplied) from the
HDMI OUT (TV-ARC)
jack on the back of the product to the HDMI
IN jack on your TV.
2.
Press the
button on the top panel of the Soundbar or the
SOURCE
button on the remote control to select
the
D.IN
mode.
●
HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
●
If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
●
We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose
diameter is less than 14 mm.
●
must be turned on.
●
This function is not available if the HDMI cable does not support ARC.