background image

ENG - 7

Connecting the Soundbar to the Subwoofer

When the subwoofer is connected, you can enjoy rich bass sound.

Automatic connection between the Subwoofer and the Soundbar

When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the 
subwoofer is automatically connected to the Soundbar.

 

When auto pairing is complete, the blue indicator at the rear of the subwoofer turn on.

LED Indicator Lights on the Rear of Subwoofer

LED

Status

Description

Resolution

Blue

On

Successfully connected  
(normal operation)

-

Blinking

Recovering the connection

Check if the power cable attached to the 
main Soundbar unit is connected properly 
or wait about 5 minutes. If blinking persists, 
try manually connecting the subwoofer. 
See page 8.

Red

On

Standby (with the Soundbar 
main unit turned off)

Check if the power cable attached to the 
main Soundbar unit is connected properly.

Connection failed

Connect again. See the instructions for 
manual connection on page 8.

Red and 

blue

Blinking

Malfunction

See the contact information for the 
Samsung Service Center in this manual.

Содержание HW-A58C
















































Отзывы: