85
System
6
6 System
z
If you have selected an device by pressing the
SOURCE
button and then selecting
its input source, you cannot use the function. Make sure to switch to an
device by using the
Device List
.
6.10.3
Receiver
You can listen to sound through a
Receiver
(i.e. Home Theater) instead of the product Speaker.
To listen to sound through a receiver, go to
Receiver
screen (
System
(HDMI-CEC)
Receiver
). Then select
Receiver
and set to
On
.
If your
Receiver
supports audio only, it may not appear in the device list.
Troubleshooting for
Problem
Possible Solution
does not work.
z
Check if the device is an device. The system
supports devices only.
z
You can connect only one receiver (home theater).
z
Check if the device power cord is properly connected.
z
Check the device’s Video/Audio/HDMI cable
connections.
z
Check whether
(HDMI-CEC)
is set to
On
in the
setup menu.
z
Check whether the remote control is compatible.
z
doesn’t work in certain situations. (Searching channels,
operating
Plug & Play
(initial setup), etc.)
z
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
z
Check if the function of the Anynet device is set on.
I want to start .
z
Check if the device is properly connected to the product
and check if the
(HDMI-CEC)
is set to
On
in the
Setup menu.
z
Press the
TOOLS
button to display the menu and select
a menu you want.
I want to exit .
z
Select
View PC
in the menu.
z
Press the
SOURCE
button on the product remote control and
select a non- device.
