Multimedia 94
Important!
Neither device must be in Lock mode or displaying
the Lock screen. They must both be active and
unlocked. It is recommended that the target device
be on the Home screen.
7.
Place the two active NFC-enabled devices back to back
to begin (1).
Note:
If the
Touch to beam
screen does not appear on the
source device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
8.
From the
Touch to beam
screen, tap the reduced image
preview to begin the transfer (2).
9.
When prompted, separate the two devices. After a few
seconds (depending on file size) the recipient with then
see the transferred file displayed on their screen.
To share multiple pictures via S Beam:
1.
On the source device (containing the desired image or
video), tap
➔
Gallery
.
2.
Locate the selected folder.
3.
Touch and hold the first image and place a checkmark
on it and all desired images.
4.
Place the two active NFC-enabled devices back to back
to begin.
Touch to beam
Place devices back to back
Tap the source image
DRAFT
For Internal Use Only