Before you start
English
35
Before you start
Here are a few things you should know before starting your dryer.
Sort and load
• Put one wash load in the dryer at a
time.
• Do not mix heavy and lightweight items
together.
• To improve drying efficiency for one or
two items, add a dry towel to the load.
• For best results, untangle items before
inserting them into the dryer.
• Overloading causes uneven drying and
wrinkling.
• Unless recommended on the care label,
do not dry woolens or fiberglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol,
gasoline, or other flammable materials.
Lint filter
A
To prevent a risk of fire, make sure to
clean the lint filter before or after every
load.
1.
Turn the dryer off.
2.
Open the door, and then pull out the
lint filter (A)
from inside the drum.
3.
Open the lint filter by separating it at
the top. Remove the lint and any other
debris that has accumulated in the
filter.
4.
Close the lint filter, reinsert the lint
filter into the dryer, and then close the
dryer door.
CAUTION
• Do not operate the dryer without the
lint filter in place.
• Do not use a damaged or broken lint
filter. This may reduce performance
and/or cause a fire.
FlexDry_DM9600M-DC68-03381H_EN.indd 35
2017-01-29 10:47:35