Tools 144
10.
Click on the
Library
entry (from the left column) and select
a category to reveal available songs.
11.
Click a song from the center column and drag it into the
Sync List section of the current page. This then places the
current song on a “wait list” for update to the target
location within the phone.
12.
Click the
Start Sync
button (at the bottom of the Sync List)
to begin uploading the selected songs to your handset. A
“
synchronization in progress
” message appears on the
application. Do not unplug the handset during this process.
Once complete, a
Sync Results
folder then appears below
the device entry to indicate sync status.
13.
It is now safe to unplug the USB connector from the
handset.
Importing a Playlist from Windows Media Player
1.
Open Windows Media Player on your computer (version
10.0 or higher).
2.
Use the USB adapter cable to connect the handset to the
target PC. When an active connection has been
established, a USB icon (
) appears on the phone.
3.
Once the USB connection has been established, the
handset displays “
Connected
” and the computer screen
then shows your phone.
4.
If not already active, click the
Sync
tab.
5.
Locate the Playlist section (upper-left).
6.
Right-click a playlist entry and select
Add to ‘Sync List’.
7.
Click the
Start Sync
button (at the bottom of the Sync List)
to begin uploading the selected playlist to your handset.
8.
It is now safe to unplug the USB connector from the
handset.
Voice Recognition
Nuance Voice Recognition software is an advanced speech
recognition software used to activate a wide variety of functions
on your phone. Nuance software automatically voice activates
(up to 2,000 contacts) for voice dialing and searching. No
pre-recording or training needed. Speak a contact name
naturally to dial, and use your voice to look up contacts, launch
applications and navigate phone menus.
1.
Touch
➔
Tools
➔
Voice Recognition
.
2.
At the voice prompt, say a command. The list of available
commands is listed below.
