25
Expansion Units Features
Just like the ES NAS system, the power button, Power/Status LED indicators and LCD status display
are conveniently located at the front panel on the EJ expansion units for easy access
.
Font Panel LEDs and Buttons
Item
Description
LED Color
Status
1
Power on button
System power on button
2
System Power LED
Green
On = System power on
Off = System power off
3
Status
Green
Orange
Green =The system is operating normally.
Orange = The Power Supply Unit has been unplugged.
4
LCD status display
The two-digit number represents the expansion unit
number. It corresponds to the REXP# in the Storage
Manager of the QES.
Enclosure IDs
Each expansion enclosure has an ID number associated with it. The ID allows each enclosure to be
identified properly to the ES NAS system. Each enclosure must use a unique value. The Storage Manager
of the QES uses the Enclosure IDs to identify each expansion enclosure.
For both enclosure models EJ1600 and EJ1602, the enclosure ID is indicated by a two-digit LCD status
display located on the front panel. The QES automatically sets the enclosure ID number as the REXP#.
There are no switches on the expansion enclosures to manually set the enclosure ID. To reinitialize or
reorder the expansion units, use the “Reinitialize Enclosure ID” function of the QES. For more
information, please refer to the software user manual.
Rear Panel LEDs and Buttons
01
①②③④ ⑤ ⑥ ⑦
Service Ports Onboard SAS Ports
Содержание ES1642dc
Страница 33: ...33 3 Take off the top cover of the Storage Controller by uninstalling the screws 3 at the top 2 at each side...
Страница 35: ...35 3 Take off the top cover of the Storage Controller by uninstalling the screws 3 at the top 2 at each side...
Страница 40: ...40 Figure 4 Attach the screws 1 1 1 1 2 2...
Страница 44: ...44 Appendix C Product Compliance Class NAS Models FCC CE ES1640dc Class A Class A ES1642dc Class A Class A...
