English
33
Oper
ations
Simple steps to start your dishwasher
1.
Open the door, and then load the dishwasher. Make sure dishes are empty.
2.
If applicable, put the dishes in the lower rack. If adding the
Storm Wash+
option, put the
dishes in the left side of the lower rack.
3.
Add detergent to the detergent dispenser. For better results, add rinse aid to the rinse
aid compartment.
NOTE
You should use rinse aid for better drying performance. You can further improve drying
performance by also selecting the
Sanitize
option.
4.
Press
Power
, and then select a cycle with necessary options (Lower Rack, Storm Wash+,
Hi-Temp Wash, Sanitize).
If you change the cycle after selecting an option, the original cycle is reset.
5.
Press
Start
, and then close the door within 3 seconds. The dishwasher starts the cycle
after draining for a few seconds.
NOTE
• To change the cycle after it has started, press and hold
Start
for 3 seconds to cancel the
cycle. Then, select a new cycle.
• To resume after you have opened the door to stop the dishwasher while operating,
simply press
Start
first, and then close the door.
DW5000C_DW80CB507012AA_DD68-00261A-00_EN_FULL.indd 33
2023-03-24 12:21:11