English
33
Installation
Exhaust ducting guide
Ducting
1.
Make sure the dryer is installed properly so the air exhausts freely.
2.
Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use
lint-trapping screws.
3.
To facilitate the exhaust, keep the ducts as straight as possible.
Cleaning
Clean all old ducts before installing the dryer, and make sure the vent flap opens and
closes freely. We recommend that you clean the exhaust system annually or on a regular
basis.
WARNING
• To prevent fire, do not use plastic, thin-foil, or non-metal flexible ducts of any kind.
• Do not use a poor exhaust system because it slows down the dryer’s performance.
• Do not use excessively long ducts that have multiple elbows.
• Do not use crushed or clogged venting or ducts.
Door reversal
Type 1
1.
Put a soft rug on the floor to rest the
door on after you have removed it.
This will prevent the door from being
scratched.
2.
Unplug the power cord.
3.
Remove two door hinge screws.
4.
Lift the door and remove it.
NOTE
There is a screw on the back side of the
hinge that will support the door as you
unscrew the hinge screws.
Untitled-13 33
2020-12-04 3:24:49
Содержание DVE45T6000 Series
