English - 23
02 INS
T
ALLING Y
OUR DR
YER
FINAL INSTALLATION CHECKLIST
• the dryer is plugged into an electrical outlet and is properly grounded.
• The exhaust ductwork is hooked up and the joints are taped.
• A plastic fl exible duct is NOT used.
• Use rigid or stiff -walled fl exible metal vent material.
• The dryer is level and is sitting fi rmly on the fl oor.
• Gas models – the gas is turned on with no gas leaks.
• Start your dryer to confi rm that it runs, heats, and shuts off .
DRYER EXHAUST TIPS
A plastic or non-metal fl exible duct presents a potential fi re hazard.
1.
Make sure your dryer is installed properly so it exhausts air
easily.
Wall
Duct
Exhaust
Dryer
2.
Use a 4” diameter rigid metal duct. Tape all joints, including
at the dryer. Never use lint-trapping screws.
Duct
Tape
4”
3.
Keep ducts as straight as possible.
4.
Clean all old ducts before installing your new dryer. Be sure
the vent fl ap opens and closes freely. Inspect and clean the
exhaust system annually.
Don’t let a poor exhaust system slow the drying process by:
• Restricting
your
dryer with a poor
exhaust system.
• Using a plastic, thin
foil, or non-metal
fl exible duct.
• Unnecessarily
using
long ducts that have
many elbows.
• Allowing dented or
clogged ducts and
vent.
WARNING
DV457E1_02836J-06_EN_140428.indd 23
DV457E1_02836J-06_EN_140428.indd 23
2014-04-28
5:30:05
2014-04-28
5:30:05
Содержание DV457E1 Series
Страница 150: ...Mémo DV457E1_02836J 06_CFR indd 74 DV457E1_02836J 06_CFR indd 74 2014 04 28 5 13 28 2014 04 28 5 13 28 ...
Страница 151: ...Mémo DV457E1_02836J 06_CFR indd 75 DV457E1_02836J 06_CFR indd 75 2014 04 28 5 13 28 2014 04 28 5 13 28 ...
Страница 226: ...Memo DV457E1_02836J 06_MES indd 74 DV457E1_02836J 06_MES indd 74 2014 04 28 5 35 16 2014 04 28 5 35 16 ...
Страница 227: ...Memo DV457E1_02836J 06_MES indd 75 DV457E1_02836J 06_MES indd 75 2014 04 28 5 35 16 2014 04 28 5 35 16 ...