English - 24
11.
Fit the lower area of the holder lever in the frame-front hole in the
arrow direction, and push in the holder lever to the end while holding
down the
hook (A)
.
A
12.
Reattach the screws in the remaining holes.
13.
When the holder lever is attached properly, it is supposed to be flexible
in all four directions.
Final installation checklist
•
The dryer is plugged into an electrical outlet and is properly grounded.
•
The exhaust ductwork is hooked up and the joints are taped.
•
A plastic flexible duct is NOT used.
•
Use rigid or stiff-walled flexible metal vent material.
•
The dryer is level and is sitting firmly on the floor.
•
Gas models – the gas is turned on with no gas leaks.
•
Start your dryer to confirm that it runs, heats, and shuts off.
DV5000H_DC68-03381A-19_EN.indd 24
2020-03-09 1:45:51
Содержание DV42H5400E
Страница 90: ...Mémo DV5000H_DC68 03381A 19_CFR indd 46 2020 03 09 1 45 28 ...
Страница 91: ...Mémo DV5000H_DC68 03381A 19_CFR indd 47 2020 03 09 1 45 28 ...
Страница 138: ...Notas DV5000H_DC68 03381A 19_MES indd 46 2020 03 09 1 45 00 ...
Страница 139: ...Notas DV5000H_DC68 03381A 19_MES indd 47 2020 03 09 1 45 00 ...