English -
7
installing your dryer
unpackInG your DryEr
Unpack your dryer and inspect it for shipping damage. Make sure you have received all of the items
shown below. If your dryer was damaged during shipping, or you do not have all of the items, contact
1-800-SAMSUNG (726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the dryer.
Certain internal parts are intentionally not grounded and may present a risk of electric shock only
during servicing.
Service Personnel - Do not contact the following parts while the appliance is energized: Control board
and inlet valve.
Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene,
etc.) well out of children’s reach.
Do not move the product while holding the front part of the top cover of the dryer.
- This may cause the cover to be separated and result in injury.
required accessories and tools
pliers
cutting knife
pipe wrench (gas only)
nut drivers
level
phillips screwdriver
duct tape
Wrench
3/8” female-
male nipple
baSIc rEquIrmEntS
Make sure you have everything necessary for proper installation
•
A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
•
A POWER CORD for electric dryers (except in Canada).
•
GAS LINES (if installing a gas dryer). The gas lines must meet national and local codes.
•
EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.
top cover
control panel
door
Frame Front
Filter
duct exhaust
[ bacK ]
Warning
caution
Warning
01 installing your dr
yer
DV3000J_DC68-03170N-07_EN.indd 7
2018/10/30 11:30:51