manualshive.com logo in svg

Samsung DP15HS, Руководство по обслуживанию

Samsung DP15HS - инновационный продукт, который идеально подходит для повседневного использования. У вас есть возможность скачать бесплатно сервисный мануал на этот продукт на нашем сайте. Получите всю необходимую информацию для обслуживания и ремонта вашего устройства.

Поделиться
Скачать
background image

1.

Servicing precautions are printed on the cabinet,
and should be followed closely.

2.

Always unplug the unitÕs AC power cord from the
AC power source before attempting to: (a) remove
or reinstall any component or assembly, (b)
disconnect PCB plugs or connectors, (c) connect all
test components in parallel with an electrolytic
capacitor.

3.

Some components are raised above the printed
circuit board for safety. An insulation tube or tape
is sometimes used. The internal wiring is
sometimes clamped to prevent contact with
thermally hot components. Reinstall all such
elements to their original position.

4.  After servicing, always check that the screws,

components and wiring have been correctly
reinstalled. Make sure that the area around the
serviced part has not been damaged.

1.

Immediately before handling any semiconductor
components or assemblies, drain the electrostatic
charge from your body by touching a known earth
ground. Alternatively, wear a discharging wrist-
strap device. To avoid a shock hazard, be sure to
remove the wrist strap before applying power to
the monitor.

2.

After removing an ESD-equipped assembly, place it
on a conductive surface such as aluminum foil to
prevent accumulation of an electrostatic charge.

3.

Do not use freon-propelled chemicals. These can
generate electrical charges sufficient to damage
ESDs.

4.

Use only a grounded-tip soldering iron to solder or
desolder ESDs.

5.

Use only an anti-static solder removal device. Some
solder removal devices not classified as Òanti-staticÓ
can generate electrical charges sufficient to damage
ESDs.

5.

Check the insulation between the blades of the AC
plug and accessible conductive parts (examples:
metal panels, input terminals and earphone jacks).

6.

Insulation Checking Procedure: Disconnect the
power cord from the AC source and turn the power
switch ON. Connect an insulation resistance meter
(500 V) to the blades of the AC plug.

The insulation resistance between each blade of the
AC plug and accessible conductive parts (see
above) should be greater than 1 megohm.

7.

Never defeat any of the +B voltage interlocks. Do
not apply AC power to the unit (or any of its
assemblies) unless all solid-state heat sinks are
correctly installed.

8.

Always connect a test instrumentÕs ground lead to
the instrument chassis ground 

before

connecting the

positive lead; always remove the instrumentÕs
ground lead last.

6.

Do not remove a replacement ESD from its
protective package until you are ready to install it.
Most replacement ESDs are packaged with leads
that are electrically shorted together by conductive
foam, aluminum foil or other conductive materials.

7.

Immediately before removing the protective
material from the leads of a replacement ESD,
touch the protective material to the chassis or
circuit assembly into which the device will be
installed.

Caution: Be sure no power is applied to the 

chassis or circuit and observe all 
other safety precautions.

8.

Minimize body motions when handling
unpackaged replacement ESDs. Motions such as
brushing clothes together, or lifting your foot from
a carpeted floor can generate enough static
electricity to damage an ESD.

9.

Indicates ESDs on the Schematic Diagram in

this manual.

1 Precautions

1-2

DP15H*/DP17L*

1-3  Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly
called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated circuits and some field-
effect transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

1-2  Servicing Precautions

WARNING1: First read the “Safety Precautions” section of this manual. If unforeseen circumstances

create conflict between the servicing precautions and safety precautions, always
follow the safety precautions.

WARNING2: A high voltage VR replaced in the wrong direction may cause excessive X-ray

emissions.

WARNING3: An electrolytic capacitor installed with the wrong polarity might explode.

Содержание DP15HS










































































Отзывы:

Нет отзывов

Похожие инструкции для DP15HS

Soundstream VRN-65HB Owner'S Manual preview
VRN-65HB
Бренд: Soundstream Страницы: 27
ELREHA TAA 1043/ST Datasheet preview
TAA 1043/ST
Бренд: ELREHA Страницы: 4
SWIT Electronics S-1273F User Manual preview
S-1273F
Бренд: SWIT Electronics Страницы: 22
voxicon VXD-P44UWHD User Manual preview
VXD-P44UWHD
Бренд: voxicon Страницы: 11
Fujitsu Siemens Computers SCALEOVIEW S17-2 Operating Manual preview
SCALEOVIEW S17-2
Бренд: Fujitsu Siemens Computers Страницы: 36
Dante DLV6230-26 Installation And Operation Manual preview
DLV6230-26
Бренд: Dante Страницы: 10
TETRALEC DN-107NE Operation Manual preview
DN-107NE
Бренд: TETRALEC Страницы: 23
Moravian Instruments DataLab LCD 15 Manual preview
DataLab LCD 15
Бренд: Moravian Instruments Страницы: 11
Soehnle FT 5 Operating Instructions Manual preview
FT 5
Бренд: Soehnle Страницы: 23
BenQ MD SERIES User Manual preview
MD SERIES
Бренд: BenQ Страницы: 58
Murphy PowerView PV-101 Manual preview
PowerView PV-101
Бренд: Murphy Страницы: 11
Babyfon BM 880 ECO Instruction Manual preview
BM 880 ECO
Бренд: Babyfon Страницы: 26
NEC MultiSync 70GX2 Pro User Manual preview
MultiSync 70GX2 Pro
Бренд: NEC Страницы: 19
NEC Monitor Quick Start Manual preview
Monitor
Бренд: NEC Страницы: 8
NEC MULTEOS M46 Technical Specifications preview
MULTEOS M46
Бренд: NEC Страницы: 2
NEC MultiSync 20WGX²Pro Specifications preview
MultiSync 20WGX²Pro
Бренд: NEC Страницы: 2
NEC MULTEOS M461 Specifications preview
MULTEOS M461
Бренд: NEC Страницы: 2
NEC MultiSync 1940CX Dimensional Drawing preview
MultiSync 1940CX
Бренд: NEC Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды