SAMSUNG
System Administration and Special Features Guide
DCS-816
March 1999
3 - 16
4. Press
TRSF
to store and exit programming
OR press
SPEAKER
to store and advance to the next
program
3.17 ADDING NAMES TO THE TRANSLATION TABLE
[MMC 728]
This program allows the system administrator to associate a CLIP number received from
the central office with a name programmed in this translation table.
The translation table consists of 200 entries, each comprising a 16-digit telephone number
and a 16-digit name.
The procedure for entering names is as described in “Procedure for Entering Names” un-
der section
3.4 Program Station Names
.
PROGRAM KEYS
UP & DOWN
Used to scroll through options.
KEYPAD
Used to enter selections.
SOFT KEYS
Move cursor left and right.
SPEAKER
Used to store data and advance to next program.
HOLD
Used to clear previous entry.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Select
728
CLIP XLAT (001)
DIGIT :
2. Dial an entry number (e.g.,
005
)
OR use
UP
or
DOWN
to scroll through entries and
CLIP XLAT (005)
DIGIT : _
press the right soft key to select entry
CLIP XLAT (005)
DIGIT : 3054264100
3. Enter the telephone number and press right soft key
to advance to name entry
OR enter the telephone number and press the left soft
key to return to step 2
CLIP XLAT (005)
SAMSUNG TELECOM
4. Enter associated name and press right or left soft key
to return to step 2
OR press
SPEAKER
to save and advance to the next
program
OR press
TRSF
to save and exit programming
