SAMSUNG
System Administration and Special Features Guide
DCS-816
March 1999
3 - 2
ACTION
DISPLAY
1. Select
505
OLD:1 0 6 0 1 9 8 : 1 2 2 0
NEW : MMDDYY:HHMM
2. Enter new time and date using above table
OLD:1 0 6 0 1 9 8 : 1 2 2 0
NEW:2 0 7 0 7 9 8 : 1 5 4 5
3. Verify time and date
Reenter if necessary
OLD:2 0 7 0 7 9 8 : 1 5 4 5
NEW: MMDDYY:HHMM
4. Press the right soft key to return to step 2
OR press
TRSF
to store and exit programming
OR press
SPEAKER
to store and advance to the
next program.
If you have entered invalid data, you will receive an [INVALID ENTRY] message for three
seconds. Reenter the correct date and time. If the information you entered is incorrect, re-
peat the procedure.
3.3 RESET STATION PASSCODES TO DEFAULT
[MMC 101]
Individual keyset users can set or change their individual passcodes. These passcodes
are used to lock and unlock keysets, override toll restriction (call barring) and access the
DISA feature. At times, it may be necessary for the system administrator to reset a sta-
tion's passcode to default "1234". This program is used only to reset the passcodes and
cannot be used to display them.
PROGRAM KEYS
UP & DOWN
Select the extension number.
HOLD
Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Select
101
[201] PASSCODE
PASSCODE:
✱✱✱✱
2. Dial the station number (e.g.,
205
)
OR use the
UP
and
DOWN
keys to scroll through the
[205] PASSCODE
PASSCODE:
✱✱✱✱
keyset numbers and press the right soft key to move
the cursor right
3. Press
HOLD
to reset passcode
[205] PASSCODE
PASSCODE: 1234
