background image

9

Caution

Do not disconnect the power cord while the product is being used.

 

• The product may become damaged by an electric shock.

!

Only use the power cord provided with your product by Samsung. Do 

not use the power cord with other products.

 

A fire or electric shock may result.

!

Keep the power socket where the power cord is connected 

unobstructed.

 

• The power cord must be disconnected to cut off power to the 

product when an issue occurs.

 

• Note that the product is not completely powered down by using 

only the power button on the remote.

!

Hold the plug when disconnecting the power cord from the power 

socket.

 

An electric shock or fire may result.

Installation

Warning

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON 

TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT 

SOURCES.

 

A fire may result.

!

Have a technician install the wall-mount hanger.

 

• Installation by an unqualified person can result in an injury.

 

• Only use approved cabinets.

Do not install the product in poorly ventilated spaces such as a 

bookcase or closet.

 

An increased internal temperature may cause a fire.

!

Install the product at least 10 cm away from the wall to allow 

ventilation.

 

An increased internal temperature may cause a fire.

!

Keep the plastic packaging out of the reach of children.

 

Children may suffocate.

Содержание DB43J





























































































































































Отзывы: