Samsung Crystal UHD UE43TU7540U Скачать руководство пользователя

Страница: 131 / 204

Sound and Noise Issues

When the TV has difficulties with sound, these steps may help resolve the problem.

Testing the sound

Settings Support Device Care Self Diagnosis Sound Test

Try Now

If the TV plays the

Sound Test

melody without distortion, there may be a problem with an external device or the

broadcast signal's strength.

The problem

Try this!

How can I connect an audio device
to the TV?

The connection method may differ depending on the audio device such as HDMI
(eARC), Optical, Bluetooth and Wi-Fi.

HDMI (ARC) is supported by some models. Check the HDMI port name of the
purchased product's model.

For more information about how to connect an audio device, run

Connection Guide

•

Source

Connection Guide

Audio Device

There is no sound or the sound is
too low at maximum volume.

Check the volume control of your TV, and then check the volume control of the
external device (cable box or satellite box, DVD, Blu-ray, etc.) connected to your TV.

Check the cable connection between an external device and the TV, and then try cable
connection again.

The picture is good but there is no
sound.

Set

Sound Output

TV Speaker

•

Settings

Sound

Sound Output

If you are using an external device, check the device’s audio output option.

For example, you may need to change your cable box’s audio option to HDMI if the box
connected to your TV is using an HDMI cable.

To listen to computer sound, connect an external speaker to the computer’s audio
output connector.

If your TV has a headphone jack, make sure there is nothing plugged into it.

Reboot the connected device by disconnecting and then reconnecting the device’s
power cable.

With a set-top box or cable box, check the cable connection and reboot the external
device. When the symptom persists, contact your service provider.

No sound is heard.

Check whether

Digital Output Audio Format

is set to

Pass-through

If you select the

Pass-through

option to use an AV receiver that does not support

Dolby

, no sound is output with

Dolby

content.

It is recommended to set

Digital Output Audio Format

Auto

when the connected

receiver supports only the limited audio formats.

•

Settings

Sound

Expert Settings

Digital Output Audio Format

Auto

- 131 -

Содержание Crystal UHD UE43TU7540U













































































































































































































Результаты поиска

Содержание Crystal UHD UE43TU7540U

Отзывы:

Похожие инструкции для Crystal UHD UE43TU7540U

Бренды по названию

Популярные бренды

Samsung Crystal UHD UE43TU7540U, Электронное руководство

Результаты поиска

Содержание Crystal UHD UE43TU7540U

Отзывы:

Похожие инструкции для Crystal UHD UE43TU7540U

Бренды по названию

Популярные бренды