Understanding Your Contacts 38
Tip:
You can also launch Metro411 from Standby mode by selecting
.
• Memory Info
: Display used and available memory for Contacts
entries.
Finding a Contacts Entry
Voice Method
Use the Voice SVC Lookup command to view contact information
for any named contact stored in your Contacts list by saying the
name.
Note:
The
Contacts
command shows the requested Contact information in
the display but does not dial any phone numbers for the Contact.
To look up information for a specific contact:
1.
In Standby mode, press and hold
to launch
Voice SVC
.
The
VOICE COMMANDS
menu appears in the display and
“
Please say a command
” is pronounced through the
speaker.
2.
Say “
Contacts
” followed by some or all of the name of the
Contact you want to view, exactly as it appears in your
Contacts list. A choice list of up to three Contacts appears
in the display, and VoiceSVC prompts you with “
Did you
say?
” followed by the first name on the list.
3.
Say “
Yes
” to confirm the name or “
No
” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to
“Voice SVC”
on
page 83.)
