English - 15
04
O
VEN USE
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or
“12:00” is automatically displayed on the display.
Please set the current time. The time is displayed the 12-hour notation. You must set the
clock:
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1.
Press the
Clock
button.
2.
Press the
Up
or
Down
button to set time display type (12H
or 24H). At that time, press the
Select
button to set the
display type.
3.
Press the
Up
or
Down
button to set the hour.
4.
Press the
Select
button.
5.
Press the
Up
or
Down
button to set the minute.
6.
When the right time is displayed, press the
Select
button to
start the clock.
Result:
The time is displayed whenever you are not
using the microwave oven.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended.
Open the door. Place the food in the centre of the turntable. Close the door. Never switch
the microwave oven on when it is empty.
1.
Press the
Microwave
button.
Result:
The following indications are displayed:
(microwave mode)
2.
Press the
Up
or
Down
button until the appropriate power
level is displayed.
At that time, press the
Select
button to set the power level.
• If don't set the power level within 5 seconds,
Automatically changes to the cooking time setting stage.
3.
Set the Cooking time by pressing the
Up
or
Down
button.
Result:
The cooking time is displayed.
4.
Press the
START
button.
Result:
The oven light comes on and the turntable starts
rotating. Cooking starts and when it has finished:
• The oven beep and flash “End” 4 times.
The oven will then beep one time per
minute.
CE76JD-CR_XTL_DE68-04168C-02_EN.indd 15
2017-07-04 12:14:23