English - 9
Installation
English - 9
Installation
installation
ACCESSORIES
Depending on the model that you have purchased, you are
supplied with several accessories that can be used in a variety of
ways.
1. Roller ring, to be placed in the centre of the oven.
Purpose : The roller ring supports the
turntable.
2. Turntable, to be placed on the roller ring with the centre
fitting to the coupler.
Purpose : The turntable serves as the main
cooking surface; it can be easily
removed for cleaning.
3. High rack, Low rack, to be placed on the turntable.
Purpose : The metal racks can be used to
cook two dishes at the same time.
A small dish may be placed on
the turntable and a second dish
on the rack. The metal racks can
be used in grill, convection and
combination cooking.
INSTALLATION SITE
• Select a flat, level surface approx. 85 cm
above the floor. The surface must support
the weight of the oven.
• Secure room for ventilation, at least 10 cm
from the rear wall and both sides, and 20 cm
from above.
• Do not install the oven in hot or damp surroundings, such as
next to other microwave ovens or radiators.
• Conform to the power supply specifications of this oven. Use
only approved extension cables if you need to use.
• Wipe the interior and the door seal with a damp cloth before
using your oven for the first time.
TURNTABLE
Remove all packing materials inside the oven.
Install the roller ring and turntable. Check that
the turntable rotates freely.
10 cm
10 cm
behind
behind
20 cm
20 cm
above
above
10 cm on
10 cm on
the side
the side
85 cm of
85 cm of
the floor
the floor
DE68-03995J-01_IB_GIANT_TL_EN.indd 9
DE68-03995J-01_IB_GIANT_TL_EN.indd 9
2023-03-30 오후 2:03:19
2023-03-30 오후 2:03:19