13
GB
Using the Power Defrost Feature (continued)
The following table presents the various Power Defrost programmes,
quantities, standing times and appropriate recommendations. Remove all
kind of package material before defrosting. Place meat, poultry and fish
on a ceramic plate.
Using the Junior Feature
The Junior(
) feature provides three auto programmed for
hamburger, ravioli and popcorn. You do not need to set either the cooking
time or power level. You can adjust the number of servings by turning the
encoder dial.
First, place the food in the centre of the turntable and close the door.
Code Food
Serving
Size
Standing
Time
Recommendations
1
Meat
200-2000g 20-90 min. Shield the edges with aluminium foil. Turn
the meat over, when the oven beeps. This
programme is suitable for beef, lamb, pork,
steaks, chops and minced meat.
2
Poultry
200-2000g 20-90 min. Shield the leg and wing tips with aluminium
foil. Turn the poultry over, when the oven
beeps. This programme is suitable for
whole chicken as well as for chicken
pieces.
3
Fish
200-2000g 20-60 min. Shield the tail of a whole fish with
aluminium foil. Turn the fish over, when the
oven beeps. This programme is suitable for
whole fishes as well as for fish fillets.
4
Bread/
Cake
125-1000g 10-60 min. Put bread or cake on a piece of kitchen
paper and turn over, as soon as the oven
beeps (oven keeps operating and is
stopped, when you open the door).
This programme is suitable for all kinds of
bread, sliced or whole, as well as for bread
rolls and baguettes. Arrange bread rolls in a
circle.
This programme is suitable for all kinds of
yeast cake, biscuit, cheese cake and puff
pastry.
It is not suitable for short/crust pastry, fruit
and cream cakes as well as for cake with
chocolate topping.
5
Fruit
100-600g
5-20 min. Spread fruits evenly into a flat glass dish or
use a flat ceramic plate. This programme is
suitable for all kinds of fruit.
1.
Turn the
Control knob
to the
Junior
(
) symbol.
2.
Select the type of food that you are cooking by pressing the
Select
(
) button. Refer to the table on the following page
for a description of the various pre-programmed settings.
3.
Select the size of the serving by turning the
encoder dial
.
4.
Increase or decrease the cooking time, if necessary, by
pressing the
More/Less
(
) button respectively.
5.
Press
Start
(
) button.
Result:
The food is cooked auto matically according to
the selected (auto programme) setting.
◆
When cooking has finished, the oven will
beep and flash “0” four times. The oven will
then beep one time per minute.
jlXXWWniUGGwGXZGG{ SGt GXZSGYWW[GG`aY`Ght
