11
GB
Using the Auto Cook Feature (continued)
Using the Auto Reheat Feature
The four Auto Reheat(
) features provide pre-programmed cooking
times. You do not need to set either the cooking times or the power level.
You can adjust the size of the serving by turning the encoder dial.
☛
Use only recipients that are microwave-safe.
Open the door. Place the food in the centre of the turntable. Close the
door.
Code
Food
Serving Size
Standing
Time
Recommendations
3
Roast Fish
200-300g
(1 pc)
400-500g
(1-2 pcs)
600-700g
(2 pcs)
800-900g
(2-3 pcs)
3 min.
Brush skin of whole fish with oil and
add herbs and spices. Put fish side by
side, head to tail on rack. Turn over, as
soon as the beep sounds.
4
Chicken
Pieces
200-300g
(1pc)
400-500g
(2pcs)
600-700g
(3pcs)
800-900g
(3-4pcs)
2-3min.
Brush the chicken pieces with oil and
spice them with pepper, salt and
paprika. Put them in a circle on the
high rack with the skin-side down.
Turn over, as soon as the beep
sounds.
5
Roast
Beef/
Roast
Lamb
900-1000 g
1200-1300 g
1400-1500 g
10-15min. Brush the beef/lamb with oil and spices
(pepper only, salt should be added
after roasting). Put it on the low rack
with the fat-side down. Turn over,
when the oven beeps. After roasting
and during standing time it should be
wrapped in aluminium foil.
1.
Turn the
Control knob
to the
Auto Reheat
(
) symbol.
2.
Select the type of food that you are cooking by pressing the
Select
(
) button. Refer to the table on the following page
for a description of the various pre-programmed settings.
3.
Select the size of the serving by turning the
encoder dial
.
4.
Increase or decrease the cooking time, if necessary, by
pressing the
More/Less
(
) button respectively.
5.
Press the
Start
(
) button.
Result:
The food is cooked according to the pre-
programmed setting selected.
◆
When cooking has finished, the oven will beep
and flash “0” four times. The oven will then
beep one time per minute.
jlXXWWniUGGwGXXGG{ SGt GXZSGYWW[GG`aY`Ght
