Samsung BQ1AD4T013/XEF, Руководство по обслуживанию

Страница: 28 / 53

- 26 -
4-1 Failure Codes
4. Troubleshooting
There are a kind of error code and two kinds of warning
codes. Possible error codes during use can be checked
before service. Press [Stand by Mode + Current time
0:00] and [Fu Time] at the same time and
hold them for 5 seconds, error codes are displayed.
Press [Function] button, the latest 5 error codes can be
checked. But, if the oven turns off, the stored error codes are deleted. Press [Fu Time] button to return to
‘normal display mode’.
4-1-1 Temp Sensor Error
Error Code Gerneral Function Solution Page
Cavity upper sensor open
Cavity lower sensor open
Cooling motor sensor open
Steam generator sensor open
Sensor Open Error
It occurs due to a defective sensor, misplaced
wires, a defective PCB.
Cavity upper sensor short
Cavity lower sensor short
Cooling motor sensor short
Steam generator sensor short
Sensor Short Error
It occurs due to a defective sensor, misplaced
wires, a defective PCB. It may occur when the
ambient temperature falls under -5°C.
4-1-2 Safety Error
Error Code Gerneral Function Solution Page
Overtime
Temp Time
~ 100°C 16 hours
105°C ~ 240°C 8 hours
245°C ~ 4 hours
This error occurs when the oven works during
CUT-OFF TIME in the same mode and at the same
temperature without any operation of an user.
This error is to prevent a risk of fire and hazards in
case an user forgets to turn off the oven after use or
the oven automatically starts in an unusual way.
The oven can be used after off.
Touch Button Short This error occurs when a button is pressed and held
for over 10 seconds.
It may occur when water soaks through the inside
of the control panel or dust particles are stuck to
TOUCH PAD. In this case, remove DISPLAY PCB,
clean TOUCH PAD PCB or replace it.
28 Page
29 Page
30 Page
31 Page