Samsung B1113JDW/XAC, Руководство по обслуживанию

Страница: 9 / 24

- 8 -
6. TEST MODE
1. Driving Compartment Test Mode
A. Hold down “ 1” and “ 2” keys simultaneously and then press POWER S/W “ 4” on.
(Whole lamps turn on and display show “ t1” after 3 Seconds.)
B. The driving compartment can be tested when you press “ 3” key right after entering
into the initial stage of the TEST MODE.
• Driving Compartment Test
Pre-wash VALVE ON(0.3sec) ®OFF(0.3sec) ® COLD VALVE ON(0.3sec) ® [OFF(0.3sec) ®
HOT VALVE ON (0.3sec) :
OPTION
] ® OFF(0.3sec) ® Rinse VALVE ON(0.3sec) ® OFF(0.3sec) ®
Pump MOTOR ON(0.3sec) ® OFF(0.3sec) ® MOTOR Left (0.5sec) ® OFF(0.5 sec) ®
MOTOR Right (0.5sec) ® OFF(0.3sec) ® HEATER RELAY ON(0.3sec) ® OFF(0.3sec) ® DOOR OPEN
(Function continues when door is closed)
2. THERMISTOR TEST MODE
A. Hold down “ 1” and “ 2” keys simultaneously and then press POWER S/W “ 4” on.
(Whole lamps turn on and display show “ t1” after 3 Seconds.)
B. Press the “ 1” key and display shows “ t2”
C. Press the “ 3” key and display shows the inside temperature of tub.