23
English
Cl
eaning a
nd Maint
ena
nc
e
Cleaning the air purifier exterior
•
Dampen a soft cloth with lukewarm water and wring it out, and then wipe the product exterior with it.
•
Use cotton swabs to wipe the grooves on the rear panel.
•
If it is hard to remove dust on the front or rear panel, remove the panel and wash it with water.
CAUTION
•
Do NOT wipe the product with an alkaline detergent or disinfectant.
•
Do NOT wipe the product surface with sulphuric acid, hydrochloric acid or organic solvent (e.g., thinner,
kerosene, acetone). Do NOT attach a sticker to the surface. The product surface may become damaged.
Cleaning the sensor unit
•
Use a vacuum cleaner to clean the area around the
sensor. If the sensor is contaminated with dust or other
foreign material, a high PM concentration may be
detected.
CAUTION
•
Do NOT put dust into the sensor inlet.
Cleaning and drying the front panel
STEP 1
Removing the front panel
•
Hold both upper sides of the front panel and pull
towards yourself.
•
Remove the clip wire from the front of the main unit.
STEP 2
Removing the front mesh
•
Turn the front panel over.
•
Hold the pulls in the upper portion and remove the
mesh.
STEP 3
Cleaning and drying the front mesh
•
Use water or a soft cloth to remove dust and other foreign
material on the front panel.
•
If you cleaned the front mesh with water, dry it thoroughly
before attaching it to the product.
CAUTION
•
The frame incorporates the display PBA.
Ensure that the frame does not come in contact with
water. Contact with water causes device failure.
PULL
PUL
L
Front mesh
Cleaning and Maintenance
Cleaning and Maintenance
Be sure to disconnect the power plug from the socket before cleaning the product.
DB68-11173A-00_IB_ACR AX9500A_Small PET_AA_EN_.indd 23
DB68-11173A-00_IB_ACR AX9500A_Small PET_AA_EN_.indd 23
2021-07-22 오전 10:58:55
2021-07-22 오전 10:58:55
