Samsung ARTIK 053s, Руководство пользователя по оборудованию

Страница: 15 / 18

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
13
Break-out Connectors
The two Break-out connector pinouts shown in
Figure 8
are defined in
Table 9
. For each connector, the odd-
numbered row is closest to the edge of the board and is noted on the silkscreen.
Starter Board to Interposer Board Interface Connectors
The Starter board interfaces to the Interposer board via two 50-pin Hirose connectors. For more information on the
pinout of these connectors, refer to the section above entitled
ARTIK O53s Interposer Board Connectors .
10 XI2C0_SCL — — —
Table 9. Break-out Connector Pin Descriptions
Odd-Numbered Connector Row Even-Numbered Connector Row
Break-out Connectors
Connector Pin
Number
Connector Pin
Number
Break-out Connectors
CON703 CON704 CON703 CON704
XPWNTOUT_1 XPWNTOUT_4 1 2 VDD_EXT3P3 VDD_EXT3P3
XPWNTOUT_2 XPWNTOUT_2 3 4 N/C XUART2_RXD
XPWNTOUT_3 XEINT2 5 6 N/C XUART2_TXD
XPWNTOUT_0 XEINT1 7 8 XI2C1_SCL XUART3_RXD
XUART1_RXD XGPIO12 9 10 Xi2C1_SDA XUART3_TXD
XUART1_TXD XGPIO10 11 12 GND GND
XGPIO26 XGPIO9 13 14 VCC_EXT3P3 VCC_EXT3P3
XGPIO25 XGPIO11 15 16 XSPI0_CLK XGPIO4
XGPIO24 XGPIO8 17 18 XSPI0_CS XGPIO5
XGPIO23 XGPIO2 19 20 XSPI0_MISO XGPIO6
XGPIO22 XGPIO1 21 22 XSPI0_MOSI XGPIO7
XEINT0 XGPIO3 23 24 GND GND
Table 8. Arduino Interface Connector Pin Descriptions (Continued)
Pin Number
Arduino Connectors
CON708 CON709 CON710 CON711