Samsung ARTIK 053s, Руководство пользователя по оборудованию

Страница: 11 / 18

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
9
Figure 4 shows the location of the power-related connectors on the Starter board.
Figure 4. Location of Power Connectors on the Starter Board
micro-USB Interface
The Starter board has one micro-USB connector located as shown in
Figure 4
. The USB port can be used to
program the module.
JTAG Interface
The Starter board provides a JTAG interface that can be used with trace and debugging equipment. In addition to
showing the location of the connector,
Figure 5 also shows a JTAG to SWD interface cable/adapter to convert from
the mini-JTAG connector to a common SWD connector used by many trace/debug instruments. The cable/adapter
set shown is available from Adafruit (www.adafruit.com).
Figure 5. JTAG Connector Location on Starter Board
The pinout of the JTAG connector is shown in Table 5 .
Power Jumpers
(CON705)
Battery Connector
(CON706)
micro-USB port
(CON700)
DC power jack
(CON712)
1
2
JTAG Connector
(CON707)
1
2
SWD cable and adapter