Samsung AM072BXV Series, Руководство по обслуживанию

Страница: 293 / 326

Key Options
Samsung Electronics 287
8-4 How to check the view mode using a tact switch
■ AM080/100/120/140/160/180/200/220/240/260AXVGGH, AM080/100/120/140/160/180/200/220/240/260AXVGGR,
AM080/100/120/140/160/180/200/220/240/260AXVAGH, AM100/120/140/160/180AXVDGH
▶
Tact switch installation and options of how to set up and functional description
■ Options of how to set up
1. Entry by pressing th e K2 for a long time.(However, the operation is only possible during the stop.)
- Upon e ntering the following is displayed. (If the compressor is set truncation, 1 or 2 is displayed in Seg4.)
- Displays the number of the currently selected option. Seg1, Seg2.
- Displays the set value of the currently selected option. Seg3, Seg4.
2. After entering the option, b riefly press the K1 switch will change the value of Seg1, Seg2 and then select the option to change.
Example)

3. Press the switch briefly to the option you want to change the items of K2 will change the value of Seg3, Seg4 and then select the option to change.
Example)

4. K2 switch is pressed for 2 seconds after the option is selected, 7-Segment entire blinks and enters the tracking mode, and the option value is
saved.
- As described above, if you do not normal shutdown the option settings can not be saved.
※ Press K1 for a long time, if you want to go back to the settings before the entry while setting the option to cancel the setting.
※ If you want the factory settings option in the setting mode, press K4 for a long time.
- K4 switch is pressed for a long time, all options settings return to the factory settings, but the settings are saved is not.
K2 switch is pressed for a long time, 7-Segment enters the tracking mode and the settings will be saved.