Samson Type 5824, Монтаж и эксплуатация

Страница: 9 / 64

EB 5824-1 EN 1-5
Safety instructions and measures
1.2 Notes on possible personal injury
WARNING !
Crush hazard arising from moving parts.
The form-fit version of the electric actuator contains moving parts (actuator and plug
stems), which can injure hands or fingers if inserted into the actuator.
Î
Do not insert hands or finger into the yoke while the valve is in operation.
Î
Disconnect the supply voltage and protect it against unintentional reconnection be-
fore performing any work on the control valve.
Î
Do not impede the movement of the actuator or plug stem by inserting objects into
their path.
WARNING !
Risk of personal injury through incorrect operation, use or installation as a result of
information on the actuator being illegible.
Over time, markings, labels and nameplates on the actuator may become covered with
dirt or become illegible in some other way. As a result, hazards may go unnoticed and
the necessary instructions not followed. There is a risk of personal injury.
Î
Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î
Immediately renew damaged, missing or incorrect nameplates or labels.
1.3 Notes on possible property damage
NOTICE
!
Risk of damage to the electric actuator due to the supply voltage exceeding the per-
missible tolerances.
The Types 5824 and 5825 Electric Actuators are designed for use according to regula -
tions for low-voltage installations.
Î
Observe the permissible tolerances of the supply voltage.